Print settings

The 3MF download includes the recommended settings for your selected printer and material. If you use the STL files, apply the settings below in your slicer.

Face down or face up

Print face-down labels with the lettering against the bed and the backing built in. Face-up labels have raised lettering and a separate pinned backing that snaps onto the label after printing.

For the face-up backing, rotate it 40° upward from its socket-down position, with the pins pointing upward. Use automatic tree supports with a 40° threshold and leave “On build plate only” off. The 3MF export places and configures this part for you. Keep supports off for the label’s blind pinholes.

Keep the slow print speeds supplied in the 3MF. Faster printing reduced the finish quality in our tests.

Quality

Use 0.10 mm layers for the label. Face-up honeycomb floors are 0.2, 0.4, 0.6, and 0.8 mm thick (2, 4, 6, and 8 layers).

Walls

Infill

Supports

Bed adhesion (clip only)

The clip needs a wide brim so it won't tip over. Leave the label without one.

Orientation

Tips

If you are printing a dark or light colored label and have a multi-nozzle printer, paint the text floors a contrasting color.

If you're getting holes or gaps on the label's bottom layer, try slowing down your print speed, and/or tightening your Arachne wall settings.

If the clip won't seat in the label, print the sizing test first. The download includes three separate pieces: a plug, the original short-wall socket, and a full-height socket with the snap indent. Print the plug and either socket to check how your printer handles the rail fit.